نظرة عامة على المشروع

A mountain highway route selection project faced significant challenges with traditional topographic surveying.

The project area included steep slopes, canyons, and other difficult terrain, making some locations difficult or unsafe for conventional ground surveying.

في إطار أسلوب المسح التقليدي، يتكون الفريق من حوالي عمال 20 مطلوب حوالي لمدة 3 أشهر to collect terrain data across only 50 كيلومتر مربع.

The complex terrain also created potential surveying blind spots, particularly in steep slopes, deep valleys, and canyon areas.

To improve surveying efficiency and data coverage, the project team introduced a multirotor UAV surveying system in 2024.

مجهزة LiDAR and oblique photography equipment, the UAV system established a new aerial surveying workflow, allowing topographic data to be collected from the air across difficult-to-access terrain.

The solution provided the project team with a more flexible and efficient approach to collecting terrain information for highway route selection.

التحديات

تضاريس جبلية معقدة

The highway route selection area is located in mountainous terrain with significant elevation changes and complex geographic features. Steep slopes, canyons, and valleys created challenges for conventional field surveying.

المناطق التي يصعب الوصول إليها

Some terrain features are difficult or unsafe for survey teams to access directly. This limits the ability of ground teams to collect comprehensive data from every required location.

Limited Survey Coverage

تتطلب عمليات المسح التقليدية ما يقارب لمدة 3 أشهر for a team of 20 workers to collect data across only 50 كيلومتر مربع. Large-area surveying therefore required significant time and manpower.

نقاط عمياء محتملة في المسح

Steep slopes and canyon areas can create gaps in conventional ground-based measurements. Missing or incomplete terrain information can affect subsequent highway route analysis and engineering planning.

High Field Workload

Survey teams must repeatedly travel through mountainous terrain to collect measurements. This increases both labor requirements and the operational difficulty of the surveying process.

The UAV Surveying Solution

To address these challenges, the project team introduced a multirotor UAV surveying system في 2024.

The UAV was equipped with:

• تحديد المدى
• Oblique photography equipment
• Aerial surveying capabilities

The system introduced an “aerial surveying” workflow that moved a significant portion of terrain data collection from the ground into the air.

The new workflow follows:

UAV Flight Planning
↓
جمع البيانات الجوية
↓
LiDAR 3D Scanning
↓
التصوير المائل
↓
Digital Terrain Modeling
↓
Highway Route Analysis

This approach provides engineers with a more comprehensive view of mountainous terrain while reducing dependence on difficult ground access.

How the UAV Surveying Works

1. Plan the Flight Mission

The survey area is divided into designated zones based on the highway route selection requirements. Flight paths are planned to provide systematic coverage of the target terrain.

2. Conduct Multirotor UAV Flights

The multirotor UAV is deployed to collect aerial data across the mountainous survey area.

Its ability to operate flexibly at relatively low altitudes makes it suitable for detailed surveying in complex terrain.

3. Capture LiDAR Data

The LiDAR system collects three-dimensional information about the terrain. This helps generate detailed elevation and topographic information for steep slopes, valleys, and other complex areas.

4. Capture Oblique Images

Oblique photography provides imagery from multiple angles, adding visual information that complements LiDAR data. This can help engineers better understand terrain features and surrounding conditions.

5. Generate Digital Terrain Data

The collected LiDAR and image data are processed to generate digital representations of the surveyed terrain. These datasets provide a more detailed basis for engineering analysis.

6. Support Highway Route Selection

Engineers can use the digital terrain information to compare potential highway alignments and evaluate terrain-related construction conditions.

---

التقنيات الرئيسية

طائرة بدون طيار متعددة الدوارات

Multirotor UAVs provide flexible flight capabilities and can operate effectively in mountainous environments where access for conventional surveying teams may be limited.

LiDAR 3D Mapping

LiDAR rapidly captures three-dimensional terrain information, making it particularly useful for mapping steep slopes, valleys, and other complex terrain.

التصوير المائل

Oblique imagery provides multi-angle visual information that complements LiDAR data and helps improve terrain interpretation.

Digital Terrain Modeling

The collected aerial data can be processed into digital terrain models that provide engineers with a more comprehensive representation of the survey area.

المسح الجوي

Moving data acquisition into the air allows difficult terrain to be surveyed without requiring personnel to physically reach every location.

---

نتائج المشروع

50 km² Survey Area

The project used UAV surveying to collect terrain information across the highway route selection area, replacing a large portion of the traditional ground-based surveying workflow.

Reduced Dependence on Ground Access

Aerial surveying reduced the need for survey personnel to physically enter steep slopes, canyons, and other difficult terrain.

Improved Terrain Data Coverage

LiDAR and oblique photography provided complementary three-dimensional and visual information, helping address potential data gaps in complex terrain.

More Efficient Route Selection Support

Digital terrain information provided engineers with a broader basis for evaluating highway alignment options and understanding terrain conditions.

Reduced Field Surveying Workload

By transferring terrain data acquisition to UAVs, the project reduced dependence on large field teams for every surveying location.